EffiReef.com

AC3 Timers/ Program

ALM&-A08 Alarm

OVF&-B11 Overflow

LW1&-B12 Low Water In Sump

LW2&-B16 Low Water 2 in Sump

HWS&-B13 High Water in Sump

LPR&-B14 Low Pressure Return Pump

LPC&-B15 Low Pressure Close L Pump

TM2$-P01 Temp sump #2

MHL$-A01 Metal Halide Light

CO2$-A02 Co2 For C.R Valve

RET#-A03 Return Pump

HET#-A04 Heater

COL%-A05 Cooler Pump

KLK%-A06 Kalk Reactor

OZN&-A07 Ozone Generator

ACT&-C01 Actinic Lights

REF&-C02 Refugim Light

SKI&-C03 Skimmer

UVA&-C04 UV Light

COP&-C06 Calcium Reactor Rec Pump

DAY&-C09 Day Timer

WTO&-C07 Water Top Off

MIX&-C08 Mixer

TUZ&-E01 Tunze Pump

Program

If Power 000 Then ALM ON

If Sun 000/000 Then MHL ON

If Sun -090/090 Then ACT ON

If Sun 000/000 Then REF OFF

If Time > 00:00 Then RET ON

If Time > 00:00 Then KLK ON

If Time > 00:00 Then SKI ON

If Time > 00:00 Then COP ON

If Time > 00:00 Then WTO ON

If Time > 00:00 Then TUZ ON

Cooler/Heater For Tank Temp

If Temp > 81.5 Then MHL OFF

If Temp > 77.7 Then COL ON

If Temp < 77.4 Then COL OFF

If Temp < 77.0 Then HET ON

If Temp > 77.3 Then HET OFF

If Temp > 79.9 Then ALM ON

If Temp < 76.0 Then ALM ON

Cooler/Heater For Sump Temp

If TmpA > 77.7 Then COL ON

If TmpA < 77.4 Then COL OFF

If TmpA < 77.0 Then HET ON

If TmpA > 77.3 Then HET OFF

If TmpA < 76.0 Then ALM ON

If TmpA > 79.9 Then ALM ON

PH & Kalk For Tank

If pH > 08.25 Then KLK OFF

If pH < 05.90 Then COP OFF

If pH < 07.90 Then ALM ON

If pH > 08.38 Then ALM ON

PH For Calcium Reactor

If pHA1 < 06.10 Then CO2 OFF

If pHA1 > 06.20 Then CO2 ON

If pHA1 > 06.40 Then ALM ON

If pHA1 < 05.90 Then ALM ON

If pHA1 < 05.80 Then COP OFF

ORP & Ozone

If ORP < 370 Then OZN ON

If ORP > 400 Then OZN OFF

If ORP > 550 Then ALM ON

If ORP < 001 Then ALM ON

Kalk Mixer

OSC 005/235 ON/OFF Then MIX OFF

If Timer MIX = ON Then WTO OFF

Max Change 030 M Then WTO OFF

Tunze Program

If Time > 09:00 Then DAY ON

If Time > 02:00 Then DAY OFF

If Timer DAY = ON Then TUZ PF1

If Timer DAY = OFF Then TUZ PF2

Pmp MODE SD for PF1

Pmp Int 030/100 for PF1

Pmp OSC 12/12/05 for PF1

Pmp MODE sD for PF2

Pmp Int 030/050 for PF2

Pmp OSC 20/20/00 for PF2

If Overflowà Stops Pump And Skimmer

If Timer OVF = ON Then WTO OFF

If Timer OVF = ON Then RET OFF

If Timer OVF = ON Then SKI OFF

If Timer RET = OFF Then SKI OFF

Alarm To confirm That System Work

If Time > 10:00 Then ALM ON

If Time > 10:02 Then ALM OFF

If Time > 15:00 Then ALM ON

If Time > 15:02 Then ALM OFF

If Time > 22:00 Then ALM ON

If Time > 22:02 Then ALM OFF

All Alarms

If SwitchA2 OPEN Then LW1 OFF

If SwitchA2 CLOSED Then LW1 ON

If SwitchA2 CLOSED Then ALM ON

If Switch1 OPEN Then TM2 OFF

If Switch1 CLOSED Then TM2 ON

If Switch1 CLOSED Then ALM ON

If SwitchA1 CLOSED Then SKI OFF

If SwitchA1 CLOSED Then RET OFF

Max Change 003 M Then RET OFF

If SwitchA2 OPEN Then OVF OFF

If SwitchA2 CLOSED Then OVF ON

If SwitchA2 CLOSED Then ALM ON

If SwitchA3 OPEN Then HWS OFF

If SwitchA3 CLOSED Then HWS ON

If SwitchA3 CLOSED Then ALM ON

If SwitchA4 OPEN Then LPR OFF

If SwitchA4 CLOSED Then LPR ON

If SwitchA4 CLOSED Then ALM ON

If SwitchA5 OPEN Then LPC OFF

If SwitchA5 CLOSED Then LPC ON

If SwitchA5 CLOSED Then ALM ON

If SwitchA6 OPEN Then LW2 OFF

If SwitchA6 CLOSED Then LW2 ON

If SwitchA6 CLOSED Then ALM ON

Feed Aà Fish Feeding

If FeedA 000 Then RET OFF

If FeedA 000 Then TUZ OFF

If FeedA 003 Then ALM OFF

If FeedA 000 Then COL OFF

If FeedA 030 Then SKI OFF

If FeedA 010 Then WTO OFF

Feed BàWater Change

If FeedB 000 Then RET OFF

If FeedB 000 Then SKI OFF

If FeedB 000 Then COL OFF

If FeedB 010 Then ALM OFF

If FeedB 000 Then HET OFF

If FeedB 020 Then WTO OFF

If FeedA 000 Then TUZ OFF

Feed C à Kalk Mixer-Manual

If FeedC 010 Then MIX ON

Feed D à Coral Feeding

If FeedD 005 Then TUZ OFF

If FeedD 000 Then SKI OFF

If FeedD 020 Then WTO OFF

This is The brain of the tank. Its control all the parameters as you can see in the program. I can Run The Tank Few Weeks Without Touching It (If everything Is O.K)

This is the PX-1000. It’s give me the option For Additional PH and Temp as well as 6 more input to the units and as you can see, all of them are for alarms

This Is The DC-8. It’s get The commands From The AC3 And send Them To The Units

This Is The “Aquaserf” That Control The Tunze Via The AC3.

This is a DIY of IO Breakout Box. All the inputs from the float Switch Are Connected to This Box And Very Easy To Handle

Since I Have 7 Inputs For Alarms, I Built A box with Relays That Will Tell Me Which Alarm Coming On, And I marked Every Alarm. The AC3 Get only One Input To The unit So This Was The Only Way To Do So.

Every Alarm Is Send To Me Via Email And SMS And I Can Identify Each Alarm By The Switch Closed That Send To My Mail.

This Is the Schematic for the Relay

Connection and for Individual Sensor.

A Junction Box That I Built For Few More Relayes,24v And 12v (For The Valves)

This is The Kalk Water Into the Sump. Its Comes Directly From The RODI Filters. Its work With Relay So When The PH is Too High The Relay Opens The Valve To Clear Water Into The Sump. If The PH Is O.k. The water goes Throw The Valve Into The Kalk Reactor And Then To The Sump

For the units That Are Not So Crucial I am Using The X-10. All Them Are On The same Phase. This Are Only Few Of Them.

RODI Water Are Enter Into The Sump Directly From The RO filter And going Either Via The Kalk Reactor Or Bypass It According to PH .This Is The Auto Top To The Sump. Its Connect to the AC3 And I Also Have a Manuel Switch So I Can stops It, For Maintenance And Water Chang. There Is also a Light That goes On When It’s activated.

This is Additional Temp Control That located in the Sump. Its control Only Alert to email And SMS For The Temp.